Sonifex S2 - Page 165

S2 User Handbook
153
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS
21
Stereo Inputs (fader down,
one channel routed):
-89dB
Stereo Inputs (unity gain, no routing): -89dB
Stereo Inputs (unity gain, one channel routed): -86dB
Stereo Inputs (unity gain,
two channels routed):
-83dB
Distortion
Total Harmonic Distortion:
0.015% at 1kHz, 0dB.
0.025% at 10kHz, 0dB.
Crosstalk
Inter-channel: < -90dBu.
Stereo: -90dBu at 1kHz.
Equalisation
LF: Shelving at 100Hz. ± 7dB
HF: shelving at 6.5kHz. ± 7dB
Range
Pan Range o/-3dB centre/o
Balance Range ± 6dB
Common Mode Rejection Ratio
Mic Input: > 100dB at 70dB gain.
Digital I/O
Sync Input Sample Rate Range: 30kHz – 100kHz
Output Sample Rates (Using Onboard Clock): 32kHz, 44.1kHz, 48kHz, & 96kHz
Output Sample Width: 16, 20, 24 bit (24 bit on V2 ODA/ODP)
Output
Headphone Output Load >45 ohms, recommended 400Ω
Maximum Output (Analogue) +26dBu balanced into 2k or greater