Sony MVS-8000X System - Page 1129

Appendix (Volume 3)
1129
Data Saved by [Setup Define] and [Initial Status Define]
Included in
Switcher
Setup
7333.4 Engineering Setup >Switcher
>Output >Safe Title
All data relating to Safe Title
menu
7333.5 Engineering Setup >Switcher
>Output >4:3 Crop
All data relating to 4:3 Crop menu
7333.6 Engineering Setup >Switcher
>Output >FC Adjust
All data relating to FC Adjust
menu
7334 Engineering Setup >Switcher
>Transition
All data relating to Transition
menu
7334.1 Engineering Setup >Switcher
>Transition >Preset Color Mix
All data relating to Preset Color
Mix menu
7334.2 Engineering Setup >Switcher >
Transition >Transition Curve
Setting data for <Fader Curve>
group
7335 Engineering Setup >Switcher
>Key/Wipe/FM/CCR
All data relating to Key/Wipe/FM/
CCR menu
7335.1 Engineering Setup >Switcher
>Key/Wipe/FM/CCR >Show Key
All data relating to Show Key
menu
7335.2 Engineering Setup >Switcher
>Key/Wipe/FM/CCR >Key Auto
Drop
All data relating to Key Auto Drop
menu
7336.1 Engineering Setup >Switcher
>Link >Internal Bus Link
All data relating to Internal Bus
Link menu
7336.4 Engineering Setup >Switcher
>Link >GPI Link
All data relating to GPI Link menu
7336.6 Engineering Setup >Switcher
>Link >M/E Link
All data relating to M/E Link menu
7336.7 Engineering Setup >Switcher
>Link >Key Transition Link
All data relating to Key Transition
Link menu
7337.1 Engineering Setup >Switcher
>Device Interface >Remote
Assign
All data relating to Remote Assign
menu
7337.2 Engineering Setup >Switcher
>Device Interface >GPI Input
All data relating to GPI Input
menu
7337.4 Engineering Setup >Switcher
>Device Interface >GPI Output
All data relating to GPI Output
menu
7337.5 Engineering Setup >Switcher
>Device Interface >AUX Control
All data relating to AUX Control
menu
7337.7 Engineering Setup >Switcher
>Device Interface >DME Type
Setting >DME SDI Interface menu
All data relating to DME SDI
Interface menu
a)
7337.8 Engineering Setup >Switcher
>Device Interface >Editor I/F
All data relating to Editor I/F menu
7322.5 Engineering Setup >Panel >Xpt
Assign >Main,V/K Pair Assign
Cross-point assignment settings
(excluding <Xpt Shift Mode> and
<Display Shift Mode> groups)
Type Menu number Menu path Saved data