Sony MVS-8000X System - Page 1139

Appendix (Volume 3)
1139
Error Messages
Icon Title Message Description
Activate
License
The license key you entered is
invalid.
Please check and enter again.
7316.7: Engineering Setup >System >Install/
Unit Config >License >License Management
In the above menu, since the entered
information was incorrect, the Activate License
procedure failed. Check the license key, and
enter again.
Activate
License
License key was successfully
entered.
The license will be activated
after rebooting your system.
7316.7: Engineering Setup >System >Install/
Unit Config >License >License Management
In the above menu, the Activate License
procedure completed successfully.
Append
Key Frame
[Append Key Frame] cannot be
executed.
FMx is not assigned to a user
region.
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to
execute [Append Key Frame], but it failed
because the frame memory output (FMx) is not
assigned to a user region.
7331.4: Make the assignment in the
Engineering Setup >Switcher >Config >User1-8
Config menu, and try again.
[Append Key Frame] cannot be
executed.
Key Frame Register is locked.
(UserX)
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to
execute [Append Key Frame] using a locked
register (UserX region). Unlock the register.
[Append Key Frame] cannot be
executed.
Key Frame Register is busy.
(UserX)
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to
execute [Append Key Frame] using a register
(UserX region) into which files are being
loaded. Try again after file loading has finished.
[Append Key Frame] cannot be
executed.
Key Frame Register is being
edited. (UserX)
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to
execute [Append Key Frame] using a register
(UserX region) with which a keyframe creating
or editing operation is proceeding. Try again
after the keyframe operation has finished.
[Append Key Frame] cannot be
executed.
Key Frame Register is full.
(UserX)
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to
execute [Append Key Frame] using a register
(UserX region) in which no keyframe remains.
[Append Key Frame] cannot be
executed.
Key Frame Register is not
active.(UserX)
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to
execute [Append Key Frame] using a register
for which the appropriate region selection
button in the numeric keypad control block is
not selected. Try again after you select the
region selection button [UserX] in the numeric
keypad control block.
Backup FM file auto extraction is
running (–3).
2564:Frame Memory >External Device
>Backup to DDR/VTR
When [Backup Start] was pressed in the above
menu, extraction of frame memory file data onto
the VTR was being executed.