Appendix (Volume 3)
1141
Error Messages
Backup Prepare failed, symbol files
create failed (–16).
2565:Frame Memory >External Device
>Restore from DDR/VTR
In the above menu, when [Backup] is pressed,
this message appears if marker frame file
creation failed (internal processing error).
Prepare failed, all one Clip
recall failed (–17).
2565:Frame Memory >External Device
>Restore from DDR/VTR
In the above menu, when [Backup] is pressed,
this message appears if All One Clip Recall
failed (internal processing error).
ERROR (–19). Bad register
number.
2565:Frame Memory >External Device
>Restore from DDR/VTR
In the above menu, when [Backup] is pressed,
this message appears if Register Number is
invalid (internal processing error).
Prepare failed, because there
is clip playing (–22).
2565:Frame Memory >External Device
>Restore from DDR/VTR
In the above menu, when [Backup] is pressed,
this message appears if processing failed
during clip playback.
Change
Password
The password has been
successfully changed.
7317.1: Engineering Setup >System
>Maintenance >Setup Operation Lock
In the above menu, the password was
successfully changed.
Change
Password
Failed.
The password was not
changed.
7317.1: Engineering Setup >System
>Maintenance >Setup Operation Lock
In the above menu, the password was not
changed.
Create
Key Frame
[Create Key Frame] cannot be
executed.
FMx is not assigned to a user
region.
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to
execute [Create Key Frame], but it failed
because the frame memory output (FMx) is not
assigned to a user region.
7331.4: Make the assignment in the
Engineering Setup >Switcher >Config >User1-8
Config menu, and try again.
[Create Key Frame] cannot be
executed.
Key Frame Register is locked.
(UserX)
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to
execute [Create Key Frame] using a locked
register (UserX region). Unlock the register.
[Create Key Frame] cannot be
executed.
Key Frame Register is busy.
(UserX)
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to
[Create Key Frame] using a register (UserX
region) into which files are being loaded. Try
again after file loading has finished.
[Create Key Frame] cannot be
executed.
Key Frame Register is being
edited. (UserX)
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to
execute [Create Key Frame] using a register
(UserX region) with which a keyframe creating
or editing operation is proceeding. Try again
after the keyframe operation has finished.
Icon Title Message Description
To Next Page
Loading...
