Chapter 7 Frame Memory
319
Still Image Operations
• To clear the effect register selected in step 4, and create a new effect:
press [Create Key Frame].
• To add to the end of the effect register selected in step 4, press [Append
Key Frame].
A confirmation message for creating the effect appears.
If there is an inappropriate condition for creating the effect, an error
message appears.
For details of error messages, see “Error Messages” in the Appendix
(Volume 3).
10
Press [OK].
This creates the effect in the selected user region register.
To cancel creating the effect
Press [Cancel].
Notes
• The effect is built with the selected files, in increasing order of the last
three characters of the file name. If you do not want to include some of
these files in the effect, first delete or rename them.
• A maximum of 99 keyframes can be included in a single effect.
Recalling a sequence of still images
Run the effect created by the foregoing procedure.
The procedure for doing this is the same as for any other effect.
For details, see “Executing Effects” in Chapter 13 (Volume 2).
To Next Page
Loading...
