Chapter 11 DME Operations
557
DME Special Effect Operations
To limit the wave range
1
Press [Range], turning it on.
2
Set the following parameters.
• When H&V mode is selected
a) Setting for SD 4:3, SD 16:9
b) Setting for HD 4:3, HD 16:9
• When Size mode is selected
a) Setting for SD 4:3, SD 16:9
b) Setting for HD 4:3, HD 16:9
To smooth the range envelope when the wave range is limited
1
Press [Range Envelope], turning it on.
Knob Parameter Adjustment Setting values
1 Size H Amount of horizontal wave
modulation
0.00 to 100.00
2 Offset H Center point of horizontal
modulation range
–8.000 to +8.000
a)
–32.000 to +32.000
b)
3 Size V Amount of vertical wave
modulation
0.00 to 100.00
4 Offset V Center point of vertical
modulation range
–8.000 to +8.000
a)
–32.000 to +32.000
b)
Knob Parameter Adjustment Setting values
1 Size H Amount of wave modulation 0.00 to 100.00
2 Offset H Center point of modulation
range
–8.000 to +8.000
a)
–32.000 to +32.000
b)
Envelope
Size
Offset