Chapter 16 Macros
829
Menu Macros
This value can be set for each menu macro register.
8
Press the [Store] button.
The numeric keypad window appears.
9
Enter the menu macro register number as required, and press [Enter].
The menu macro is saved with the specified number.
The menu returns to the state in step 1.
To set a pause duration
During menu macro editing, use the following procedure.
1
Enter the pause duration by turning the knob.
2
Press [Pause Set].
• When auto insert mode (see page 794) is on, this sets the pause duration,
and inserts the pause event.
• When auto insert mode is off, use the same operations as in step 5 of
“Creating a new menu macro” (page 827) to save the event.
Editing a menu macro
To edit the content of a menu macro, use the following procedure.
1
In the Macro >Menu Macro Register >Recall & Run menu, select the
desired register on the menu macro register list.
For details of the menu macro register list, see “Recalling a Menu Macro
Register” (page 823).
2
Press [Menu Macro Edit].
The Menu Macro Edit menu (see previous figure) appears. The menu
macro register is recalled, and the system is now in menu macro editing
mode.
3
Select the event you want to edit.
Knob Parameter Adjustment Setting values
5 Interval Time Event interval 0.0 to 0.5 (sec)
Knob Parameter Adjustment Setting values
4 Pause Time (Sec) Pause duration 0.1 to 99.9 (sec)
To Next Page
Loading...
