TAJIMA TWMX-C - Page 85

Embroidery starts
71
Chapter 4
1
2
3
4
5
6
7
8
9
10
11
(3) You want to return the frame for 11 stitches or more.
7-2-2. Frame Forward
Perform setting of Frame Forward.(→p.146)
(1) You want to advance the frame for 1 stitch.
TFMX-C, TWMX-C,
TFMX-IIC TYPE-2
Keep on pressing the stop switch.
The frame will return stitch by stitch up to 10 stitches. For 11 stitches
or more, the frame will return at high speed.
[*1]
To stop the machine, press the stop switch again.
*1:For 11 stitches or more, the frame will return in units of the number of stitches being
set.(→p.149)
TFMX (L)
Move the bar switch to the left and hold it in that position.
The frame will return stitch by stitch up to 10 stitches. For 11 stitches
or more, the frame will return at high speed.
[*1]
Returning to the original position will not suspend the machine
operation. When suspending, move it to the left.
When performing this operation, do not put your hands etc. on the machine table. Moving
frame could injure you.
TFMX-C, TWMX-C,
TFMX-IIC TYPE-2
Press the stop switch once.
TFMX (L) Move the bar switch to the left, and return it immediately.
51015
Current frame position
Embroidery direction →
Stitch by stitchHigh speed
CAUTION
!
510
Current frame position
The frame will advance.
Embroidery direction →