Telit Wireless Solutions ME910G1 - AT#NIPDSEND - Send MO Non-IP Data

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 1009 of 1039 2021-09-23
Not Subject to NDA
3.27.3. AT#NIPDSEND - Send MO Non-IP Data
This command allows the TE to send MO Non-IP data. It is supported by modules with
NBIoT technology.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#NIPDSEND=<mode>,<data>[,<rai>]
Parameters:
Name
Type
Default
Description
<mode>
integer
0
data format
Values:
0
:
ASCII format string
1
:
HEX format string
<data>
string
-
data to be sent
<rai>
integer
0
RAI (release assistance
indication) setting
Values:
0
:
No info available
1
:
No further uplink or downlink data transmission
subsequent to this transmission
2
:
Only a single downlink data transmission and no
further uplink data transmissions subsequent to this
transmission
AT#NIPDSEND?