Telit Wireless Solutions ME910G1 - AT#DIALMODE - Set Dialing Mode

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 180 of 1039 2021-09-23
Not Subject to NDA
3.2.5.6. AT#DIALMODE - Set Dialing Mode
Set command manages dialing modality.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#DIALMODE=[<mode>]
Parameter:
Name
Type
Default
Description
<mode>
integer
0
sets dialing modality
Values:
0
:
OK result code is received as soon as it starts
remotely ringing.
1
:
OK result code is received only after the called party
answers.
2
:
see Additional info section.
Additional info:
<mode>=2
The following custom result codes are received, monitoring step by
step the call status:
8. DIALING, MO in progress
9. RINGING, remote ring
10. CONNECTED, remote call accepted
11. RELEASED, after ATH
12. DISCONNECTED, remote hang-up