Telit Wireless Solutions ME910G1 - AT#MWI - Message Waiting Indication

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 90 of 1039 2021-09-23
Not Subject to NDA
3.2.2.30. AT#MWI - Message Waiting Indication
This command enables/disables the presentation of the Message Waiting Indicator
(MWI) URC.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Specific profile
No
-
2
AT#MWI=[<enable>]
Set command enables/disables the presentation of the Message Waiting
Indicator URC, it can have two formats, as show in Additional info.
Parameter:
Name
Type
Default
Description
<enable>
integer
1
enables/disables the presentation of the
#MWI: URC
Values:
0
:
disables the presentation of the #MWI: URC
1
:
enables the presentation of the #MWI: URC, see
Additional info.
Additional info:
If AT#MWI=1 has been entered, the #MWI: URC is displayed each
time
1. a new message waiting indicator is received from the
network, the URC format is:
#MWI: <status>,<indicator>[,<count>]
2. the module is powered on, the URC reports the status of the
message waiting indicators, as they are currently stored on
SIM, the format is: