Telit Wireless Solutions ME910G1 - AT#VSIMSETPROF - Set Virtual SIM Profile

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 342 of 1039 2021-09-23
Not Subject to NDA
3.4.15. AT#VSIMSETPROF - Set Virtual SIM profile
This command selects which SIM has to be used, an external physical SIM or an internal
Virtual SIM.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#VSIMSETPROF=<profId>[,<storeNewMode>]
Execution command is used to switch between the physical SIM,
connected via the external physical SIM interface, and the Virtual SIM
application, that resides inside the module's software.
Parameters:
Name
Type
Default
Description
<profId>
integer
0
indicates the profile identifier.
Values:
0
:
profile 0 represents the external physical
SIM
1
:
profile 1 represents the internal Virtual SIM
application
<storeNewMode>
integer
1
Flag to store <profId> selection in
file system
Values:
0
:
do not store <profId> in file system
1
:
store <profId> in file system
SET, READ, TEST commands return always immediate ERROR if
Virtual SIM application is not present\corrupted or wrong key is
present