Telit Wireless Solutions ME910G1 - AT#NITZ - Network Identity and Time Zone

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 490 of 1039 2021-09-23
Not Subject to NDA
3.8.7. AT#NITZ - Network Identity and Time Zone
This command handles Network Identity and Time Zone.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Other
No
-
2
AT#NITZ=[<val>[,<mode>]]
Set command enables/disables the automatic date/time updating and the
Full Network Name applying. It enables also the #NITZ URC in the format:
#NITZ: <datetime>
and permits to change its format.
Parameters:
Name
Type
Default
Description
<val>
integer
7
identifies the functionalities to enable.
The <val> parameter is a sum of integer
values, where every value corresponds to a
functionality:
8. 1 - enables automatic date/time
updating
9. 2 - enables Full Network Name
applying
10. 4 - sets the #NITZ URC 'extended'
format (see <datetime> below)
11. 8 - sets the #NITZ URC 'extended'
format with Daylight Saving Time
(DST) support (see <datetime>
below)
Values:
0
:
disables every functionality
1÷15
:
sum of integer values