Telit Wireless Solutions ME910G1 - AT#NB2 ENA - EnableDisable NB2 Mode

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 307 of 1039 2021-09-23
Not Subject to NDA
3.3.47. AT#NB2ENA - Enable/Disable NB2 mode
This execution command enables/disables NB2 mode. It is only applicable to products
supporting NB-IoT technology.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#NB2ENA=<ena>
Parameter:
Name
Type
Default
Description
<ena>
integer
0
Enable/Disable NB2 mode
Values:
0
:
Disable
1
:
Enable
AT#NB2ENA?
Read command reports the current NB2 enabling status in the format:
#NB2ENA: <ena>
AT#NB2ENA=?
Test command returns the current range of values for parameter <ena>.