Telit Wireless Solutions ME910G1 - AT#RFSTS - Read Current Network Status

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 282 of 1039 2021-09-23
Not Subject to NDA
3.3.38. AT#RFSTS - Read Current Network Status
Command reads current network status.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#RFSTS
Execution command returns the current network status. The format of the
returned message is according to the network on which the module is registered.
GSM network
#RFSTS:<PLMN>,<ARFCN>,<RSSI>,<LAC>,<RAC>,<TXPWR>,<MM>,<RR>,<NOM>,
<CID>, <IMSI>,<NetNameAsc>,<SD>,<ABND>
Parameters
Description
<PLMN>
Country code and operator code (MCC, MNC)
<ARFCN>
GSM Assigned Radio Channel
<RSSI>
Received Signal Strength Indication
<LAC>
Localization Area Code
<RAC>
Routing Area Code
<TXPWR>
Tx Power
Parameter/values
Description
<MM>
Mobility Management state (for debug purpose only)
0
NULL
3
LOCATION UPDATING INITIATED
5
WAIT FOR OUTGOING MM CONNECTION
6
CONNECTION ACTIVE
7
IMSI DETACH INITIATED
8
PROCESS CM SERVICE PROMPT
9
WAIT FOR NETWORK COMMAND
10
LOCATION UPDATE REJECTED
13
WAIT FOR RR CONNECTION LOCATION UPDATE