Telit Wireless Solutions ME910G1 - AT#SCFG - Socket Configuration

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 646 of 1039 2021-09-23
Not Subject to NDA
3.15.5. AT#SCFG - Socket Configuration
The command sets the configuration for the socket.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#SCFG=<connId>,<cid>,<pktSz>,<maxTo>,<connTo>,<txTo>
Set command sets the socket configuration parameters.
Parameters:
Name
Type
Default
Description
<connId>
integer
N/A
Socket connection identifier.
Value:
1÷6
:
Socket connection identifier value
<cid>
integer
-
PDP context identifier. To know the range
see +CGDCONT command.
<pktSz>
integer
300
Packet size in bytes to be used by the
TCP/UDP/IP stack for data sending.
Values:
0
:
select automatically default value
1÷1500
:
packet size in bytes
<maxTo>
integer
90
Exchange timeout in seconds (or socket
inactivity timeout); if there's no data
exchange within this timeout period the
connection is closed.
Values:
0
:
no timeout