Telit Wireless Solutions ME910G1 User Manual

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 758 of 1039 2021-09-23
Not Subject to NDA
3.16.19. AT#FTPTYPE - FTP Type
This command sets the FTP file transfer type.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#FTPTYPE=[<type>]
Set command, issued during a FTP connection, sets the file transfer type.
Parameter:
Name
Type
Default
Description
<type>
integer
N/A
file transfer type
Values:
0
:
binary
1
:
ASCII
The command causes an ERROR result code to be returned if no
FTP connection has been opened yet.
AT#FTPTYPE?
Read command returns the current file transfer type, in the format:
#FTPTYPE: <type>
AT#FTPTYPE=?
Test command returns the range of available values for parameter <type>:
#FTPTYPE: (0,1)

Telit Wireless Solutions ME910G1 Specifications

General

Module Type	LTE Cat M1 / NB1 / NB2
Regions	Global
Form Factor	LGA
Operating Temperature	-40°C to +85°C
GNSS	GPS, GLONASS, BeiDou, Galileo
Category	Wireless Module
Data Rate (LTE Cat M1)	375 kbps (DL), 375 kbps (UL)
Storage Temperature	-40°C to +90°C
Interfaces	UART, I2C, GPIO, SPI, ADC
Weight	6 g
SIM	3V/1.8V
Certifications	GCF, CE, FCC, PTCRB
LTE Bands	B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B28