Telit Wireless Solutions ME910G1 - AT#ICMP - Ping Support

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 709 of 1039 2021-09-23
Not Subject to NDA
3.15.29. AT#ICMP - Ping Support
Set command enables/disables the ICMP Ping support.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#ICMP=<mode>
Parameter:
Name
Type
Default
Description
<mode>
integer
1
ICMP mode
selection.
Values:
0
:
disable ICMP Ping support
1
:
enable firewalled ICMP Ping support: the module is
sending a proper ECHO_REPLY only to a subset of IP
Addresses pinging it; this subset of IP Addresses has
been previously specified through #FRWL command.
2
:
enable free ICMP Ping support; the module is sending
ECHO_REPLY to every IP Address pinging it.
AT#ICMP?
Read command returns whether the ICMP Ping support is currently
enabled or not, in the format:
#ICMP: <mode>
AT#ICMP=?