Telit Wireless Solutions ME910G1 - AT#MQSNSOCK - EnableDisable MQTT-SN Client Socket

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 947 of 1039 2021-09-23
Not Subject to NDA
3.24.12.15. AT#MQSNSOCK - Enable/disable MQTT-SN client socket
Performs the connection and login to the MQTT-SN Gateway
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#MQSNSOCK=<instanceNumber>,<create>
Set command creates/closes UDP socket for MQTT-SN client. User can
either directly Publish on QoS -1 after creating the socket or can connect
to the gateway and then perform other MQTT-SN operations.
Parameters:
Name
Type
Default
Description
<instanceNumber>
integer
N/A
Selects the client instance. The
number of available clients is
obtained with the test command.
To know maxClients value use
test command.
Value:
1÷maxClients
:
client instance Number
<create>
integer
N/A
Sets if the selected client socket
must be created or closed
Values:
1
:
Create socket
0
:
Close socket. To be used when client is in
socket connected state
AT#MQSNSOCK?