Telit Wireless Solutions ME910G1 - ATQ - Quiet Result Codes

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 146 of 1039 2021-09-23
Not Subject to NDA
3.2.4.2. ATQ - Quiet Result Codes
This command allows to enable or disable the result code.
ITU-T Recommendation V.25 ter
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
ATQ[<n>]
Set command enables or disables the result codes.
Parameter:
Name
Type
Default
Description
<n>
integer
0
enables/disables result
codes
Values:
0
:
enables result codes
1
:
disables result codes. The commands entered after
ATQ1 do not return the result code.
2
:
disables result codes (only for backward compatibility).
The commands entered after ATQ2 do not return the
result code.
If parameter is omitted, the command has the same behavior of
ATQ0.