Telit Wireless Solutions ME910G1 - ATGPSDPO - GNSS Set DPO

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 966 of 1039 2021-09-23
Not Subject to NDA
3.25.3.3. AT$GPSDPO - GNSS Set DPO
Set command sets the Dynamic Power Optimization (DPO) Control value in NV item
05596.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT$GPSDPO=<DPO>
Parameter:
Name
Type
Default
Description
<DPO>
integer
2
enable/disable DPO
Values:
0
:
DPO shall be disabled
1
:
DPO shall be enabled with dynamic duty cycle
2
:
DPO shall be enabled only if module is not connected to
an external power source (not running on battery)
Only GPS and GLONASS support DPO mode.
<DPO> = 2 is equivalent to <DPO> = 1 (DPO enabled) due to
External Power Source implementation.
AT$GPSDPO?
Read command returns the current setting for DPO, in the format:
$GPSDPO: <DPO>
AT$GPSDPO=?