Telit Wireless Solutions ME910G1 - AT#SSLI - Secure Socket Info

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 823 of 1039 2021-09-23
Not Subject to NDA
3.19.11. AT#SSLI - Secure Socket Info
This command is used to get information about secure socket data traffic.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#SSLI[=<SSId>]
Execution command is used to get information about secure socket data
traffic.
The response is in the format:
#SSLI:
<SSId>,<DataSent>,<DataRecv>,<PendingData>,<TCPConnWaitingAck>
Parameter:
Name
Type
Default
Description
<SSId>
integer
1
Secure Socket Identifier
Value:
1
:
only one SSL socket is available
Additional info:
Parameters returned by the response message and not described in
the previous sections.
Name
Type
Default
Description
<DataSent>
integer
-
total amount (in bytes)
of data sent to the
TLS/SSL connection
since the beginning of
the connection itself
(obviously: not yet