Telit Wireless Solutions ME910G1 - AT#MONI - Cell Monitor

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 293 of 1039 2021-09-23
Not Subject to NDA
3.3.41. AT#MONI - Cell Monitor
This command is both a set and an execution command.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#MONI[=[<number>]]
Set command sets one cell out of seven, in a neighbor list of the serving
cell including it, from which extract GSM/LTE related information.
After entering the set command, enter the execution command
AT#MONI<CR> to get the GSM/LTE related information for the selected
cell and dedicated channel (if exists) in the format shown, for each
network, in the Additional info section.
Parameter:
Name
Type
Default
Description
<number>
integer
-
the parameter meaning depends on the
network, see Additional info section.
Additional info:
GSM network
Name
Type
Default
Description
<number>
integer
0
GSM
network
Values:
0÷6
:
it is the ordinal number of the cell, in the
neighbor list of the serving cell.