Telit Wireless Solutions ME910G1 User Manual

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 670 of 1039 2021-09-23
Not Subject to NDA
3.15.14. AT#SA - Socket Accept
Execution command accepts an incoming socket connection.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#SA=<connId>[,<connMode>]
Execution command accepts an incoming socket connection after an URC
SRING: <connId>
Parameters:
Name
Type
Default
Description
<connId>
integer
N/A
Socket connection identifier.
Value:
1÷max
:
Socket connection identifier value (max is
returned by the Test command)
<connMode>
integer
0
Connection mode, as for
command #SD.
Values:
0
:
online mode connection
1
:
command mode connection
The SRING URC has to be a consequence of a #SL issue.
Setting the command before to having received a SRING will result
in an ERROR indication, giving the information that a connection
request has not yet been received.

Telit Wireless Solutions ME910G1 Specifications

General

Module Type	LTE Cat M1 / NB1 / NB2
Regions	Global
Form Factor	LGA
Operating Temperature	-40°C to +85°C
GNSS	GPS, GLONASS, BeiDou, Galileo
Category	Wireless Module
Data Rate (LTE Cat M1)	375 kbps (DL), 375 kbps (UL)
Storage Temperature	-40°C to +90°C
Interfaces	UART, I2C, GPIO, SPI, ADC
Weight	6 g
SIM	3V/1.8V
Certifications	GCF, CE, FCC, PTCRB
LTE Bands	B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B28