Telit Wireless Solutions ME910G1 - AT#IMSPDPSET - IMS PDP APN Number Set

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 122 of 1039 2021-09-23
Not Subject to NDA
3.2.2.47. AT#IMSPDPSET - IMS PDP APN Number Set
This command sets IMS Pdp APN Name. This name should be one of the APN names set
in +CGDCONT command and appropriated context will be opened for IMS.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#IMSPDPSET=<pdpApnName>
Parameter:
Name
Type
Default
Description
<pdpApnName>
string
-
from 1 to 32 symbols ANSI fixed
string. It can be used with or without
quotes
AT#IMSPDPSET?
Read command reports the current setting of string parameter
<pdpApnName>, in the format:
#IMSPDPSET: <pdpApnName>
If the file containing the setting is not present in EFS, read
command returns an error:
AT#IMSPDPSET?
+CME ERROR: Unable to read the nv file
The file must be created by the set command.
AT#IMSPDPSET=?
Test command returns the maximum length for string parameter
<pdpApnName>.