Telit Wireless Solutions ME910G1 - AT#STSR - SIM Toolkit Send Response

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 375 of 1039 2021-09-23
Not Subject to NDA
3.5.3. AT#STSR - SIM Toolkit Send Response
This command allows the user to provide a response to confirm the execution of the
ongoing proactive command.
3GPP TS 31.111
Telit SIM/USIM Toolkit Application Note
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#STSR=[<cmdType>[,<userAction>[,<data>]]]
The set command allows the user to provide a response action to the
ongoing proactive command when the action is required by the command
itself.
Parameters:
Name
Type
Default
Description
<cmdType>
integer
-
proactive command code, refer to
#STGI command to have information
on the <cmdType>
<userAction>
integer
0
identify the user action
Values:
0
:
the user accepts the ongoing proactive
command
16
:
proactive SIM/USIM session terminated by user
17
:
backward move in the proactive SIM/USIM
session requested by the user
18
:
no response from user
19
:
help information required by the user