Telit Wireless Solutions ME910G1 - AT#SSLSECCFG - Configure Security Parameters of a SSL Socket

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 797 of 1039 2021-09-23
Not Subject to NDA
3.19.2. AT#SSLSECCFG - Configure Security Parameters of a SSL Socket
This command allows configuring SSL connection parameters.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#SSLSECCFG=<SSId>,<CipherSuite>,<auth_mode>
Parameters:
Name
Type
Default
Description
<SSId>
integer
1
Secure Socket Identifier
Value:
1
:
Until now only one SSL socket is available
<CipherSuite>
integer
0
identify the cipher suite. The
<CipherSuite> parameter is
expressed in decimal and hex format
to identify different cipher suites.
The cipher suites identified by
<CipherSuite> parameters
expressed in decimal format are
listed in the Value section right
below.
The cipher suites identified by
<CipherSuite> (RCF) values
expressed in hex format are listed in
the Additional info section.
Values:
0
:
cipher suite is chosen by remote server among
the following:
TLS_RSA_WITH_AES_128_CBC_SHA,