Telit Wireless Solutions ME910G1 - AT#FTPPUT - FTP Send File

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 749 of 1039 2021-09-23
Not Subject to NDA
3.16.14. AT#FTPPUT - FTP Send File
This command sends a file to the FTP server.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Other
No
-
2
AT#FTPPUT=[<filename>[,<connMode>]]
Execution command, issued during an FTP connection, opens a data
connection and starts sending <filename> file to the FTP server.
Parameters:
Name
Type
Default
Description
<filename>
string
-
name of the file (maximum length 200
characters)
<connMode>
integer
0
select online or command mode:
If online mode is selected (default) and
the data connection succeeds, a
CONNECT indication is sent; afterward
a NO CARRIER indication is sent when
the socket is closed.
If command mode is selected and the
data connection succeeds, we remain
in command mode and we see the
result code OK (instead of CONNECT).
Values:
0
:
online mode
1
:
command mode
Use the escape sequence +++ to close the data connection.