Telit Wireless Solutions ME910G1 - AT#BNDPRIEXT - Band Priority Setting

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 229 of 1039 2021-09-23
Not Subject to NDA
3.3.19. AT#BNDPRIEXT - Band Priority Setting
Set command configures the CAT-M1 and NB-IoT bands scanning priority in dedicated
EFS file.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#BNDPRIEXT=<high_priority_bands_CATM>[,<high_priority_bands_NB>]
Parameters:
Name
Type
Default
Description
<high_priority_bands_CATM>
string
-
hexadecimal string
indicating a sequence
of maximum 43 bands,
each one two bytes
long; a special value of
0 is used to indicate
that file must be
deleted
<high_priority_bands_NB>
string
-
hexadecimal string
indicating a sequence
of maximum 43 bands,
each one two bytes
long; a special value of
0 is used to indicate
that file must be
deleted
Command needs a reboot to be effective.
AT#BNDPRIEXT?
Read command returns the current parameters setting for #BNDPRIEXT
command in the format: