Telit Wireless Solutions ME910G1 - AT#QSS - Query SIM Status

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 328 of 1039 2021-09-23
Not Subject to NDA
3.4.9. AT#QSS - Query SIM Status
Query SIM Status.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
AT#QSS=[<mode>]
Enables/disables the Query SIM Status unsolicited indication in the ME.
The format of the unsolicited indication is the following:
#QSS: <status>
The parameter is described in the Unsolicited field section.
Parameter:
Name
Type
Default
Description
<mode>
integer
0
Type of notification
Values:
0
:
disabled. It is only possible to query the current SIM
status through read command AT#QSS?
1
:
enabled. The ME informs at every SIM status change
through the basic unsolicited indication where
<status> range is 0...1
2
:
enabled. The ME informs at every SIM status change
through the basic unsolicited indication where
<status> range is 0...3
Unsolicited field:
Name
Type
Description
<status>
integer
current SIM status
Values: