Telit Wireless Solutions ME910G1 - AT#BSRCFG - Buffer Status Reporting (BSR) Configuration606

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 606 of 1039 2021-09-23
Not Subject to NDA
3.14.4. AT#BSRCFG - Buffer Status Reporting (BSR) Configuration
This command configures the Buffer Status reporting timers.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Specific profile
No
-
2
AT#BSRCFG=<idleTo>
Execution command sets the idle timeout value of Buffer Status Reporting.
Parameter:
Name
Type
Default
Description
<idleTo>
integer
N/A
Timer value in seconds
Value:
1÷1800
:
Timer value in seconds
The BSR setting has only effect on LTE Cat.M and NB-IoT (User
Plane) technologies.
AT#BSRCFG?
Read command returns the current <idleTo> time in the format:
#BSRCFG: <idleTo>
AT#BSRCFG=?
Test command reports the supported range of values of <idleTo> in
seconds.