Telit Wireless Solutions ME910G1 - AT#FTPOPEN - FTP Connection Opening

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 747 of 1039 2021-09-23
Not Subject to NDA
3.16.13. AT#FTPOPEN - FTP Connection Opening
This execution command opens an FTP connection toward the FTP server.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#FTPOPEN=[<server:port>,<username>,<password>,<mode>[,<cid>]]
Parameters:
Name
Type
Default
Description
<server:port>
string
-
address and port of FTP server
(factory default port 21), in the format:
59. "ipv4" / "ipv4:port"
60. "ipv6" / "[ipv6]" / "[ipv6]:port"
61. "dynamic_name" /
"dynamic_name:port"
<username>
string
-
authentication user identification for
FTP
<password>
string
-
authentication password for FTP
<mode>
integer
0
active or passive mode
Values:
0
:
active mode
1
:
passive mode
<cid>
string
-
PDP context identifier
In FTP Open case, the solution dependency limits the maximum
time out to 1200 (120 seconds). The FTPTO value that exceed 1200
is considered as 1200.
Before opening FTP connection the PDP context must been
activated with #SGACT.