Telit Wireless Solutions ME910G1 - AT+CMSS - Send Message from Storage

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 429 of 1039 2021-09-23
Not Subject to NDA
3.6.15. AT+CMSS - Send Message from Storage
This command sends to the network a message which is already stored in the <memw>
storage.
3GPP TS 27.005
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT+CMSS=<index>[,<da>[,<toda>]]
Execution command sends to the network a message which is already
stored in the <memw> storage (see +CPMS) at the location <index>.
Parameters:
Name
Type
Default
Description
<index>
string
-
location value in the message storage
<memw> of the message to send
<da>
string
-
destination address, string type
represented in the currently selected
character set (see +CSCS); if it is given it
shall be used instead of the one stored with
the message.
<toda>
integer
N/A
type of destination address
Values:
129
:
number in national format
145
:
number in international format (contains the "+")
Additional info: