Telit Wireless Solutions ME910G1 - AT#SSLH - Close a SSL Socket

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 815 of 1039 2021-09-23
Not Subject to NDA
3.19.7. AT#SSLH - Close a SSL Socket
This command allows closing the SSL connection.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#SSLH=<SSId>[,<ClosureType>]
Parameters:
Name
Type
Default
Description
<SSId>
integer
1
Secure Socket Identifier
Value:
1
:
only one socket is available
<ClosureType>
integer
0
type of socket closure.
Value:
0
:
only value 0 is supported
If secure socket has not be enabled through #SSLEN command,
only test command can be used.
AT#SSLH=?
Test command returns the range of supported values for all the
parameters:
#SSLH: (1),(0)