Telit Wireless Solutions ME910G1 - AT+IPR - UART DCE Interface Data Rate Speed

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 155 of 1039 2021-09-23
Not Subject to NDA
3.2.4.9. AT+IPR - UART DCE Interface Data Rate Speed
The command sets the speed of the USIF0 serial port, see document [1].
[1] Hardware User's Guide of the used module
[2] ITU-T Recommendation V25 ter
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
AT+IPR=<rate>
The command sets the UART speed of the USIF0 port during command
mode operations.
Parameter:
Name
Type
Default
Description
<rate>
integer
115200
speed of the serial USIF0 port expressed in
bit per second.
Values:
300
:
bps
600
:
bps
1200
:
bps
2400
:
bps
4800
:
bps
9600
:
bps
19200
:
bps
38400
:
bps
57600
:
bps