Telit Wireless Solutions ME910G1 - AT+CPLS - Selection of Preferred PLMN List

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 208 of 1039 2021-09-23
Not Subject to NDA
3.3.10. AT+CPLS - Selection of Preferred PLMN List
The command is used to select a list of preferred PLMNs in the SIM/USIM card.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT+CPLS=<list>
Set command select one PLMN selector with Access Technology list in the
SIM card or active application in the UICC (GSM or USIM), that is used by
+CPOL command.
Parameter:
Name
Type
Default
Description
<list>
integer
0
PLMNs list
selector
Values:
0
:
User controlled PLMN selector with Access Technology
EFPLMNwAcT, if not found in the SIM/UICC then PLMN
preferred list EFPLMNsel (this file is only available in
SIM card or GSM application selected in UICC)
1
:
Operator controlled PLMN selector with Access
Technology EFOPLMNwAcT
2
:
HPLMN selector with Access Technology
EFHPLMNwAcT
The value set by command is directly stored in NVM and doesn't
depend on the specific CMUX instance.