Telit Wireless Solutions ME910G1 - AT#GTP - Get Position from GTP WWAN Service

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 988 of 1039 2021-09-23
Not Subject to NDA
3.25.4.6. AT#GTP - Get Position from GTP WWAN Service
Execute command returns a position based on cellular database from GTP (Global
Terrestrial Positioning) WWAN service.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#GTP
Execute command returns the following message:
#GTP: <latitude>,<longitude>,<altitude>,<accuracy>
Additional info:
Meanings of the parameters returned by the command.
Name
Type
Default
Description
<latitude>
integer
N/A
latitude specified in WGS84
datum
Value:
-90÷90.0
:
expressed in degrees, (+/-: North /
South)
<longitude>
integer
N/A
longitude specified in WGS84
datum
Value:
-180÷180.0
:
expressed in degrees, (+/-: East /
West)
<altitude>
integer
N/A
altitude with respect to the
WGS84 ellipsoid
Value:
-500÷15883
:
expressed in meters