Telit Wireless Solutions ME910G1 - Page 989

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 989 of 1039 2021-09-23
Not Subject to NDA
<accuracy>
integer
-
horizontal position uncertainty
(circular) expressed in meters
Define the PDP context via +CGDCONT command before using
#GTP command
AT#GTP=?
Test command returns the OK result code.
•
AT#GTP
#GTP: 12.905499, 77.648928,0, 5082.77
OK
•
Consider the scenario where a client invokes GTP service to fetch
the coordinates. Below is the sequence of commands to be followed
Enable the GTP. Device will reboot
AT#GTPENA=1
OK
AT+CGDCONT=<cid>,<pdp_type>,<APN>
OK
AT#GTP
#GTP: 12.905499, 77.648928,0, 5082.77