Telit Wireless Solutions ME910G1 - ATGPSR - Reset the GPS Controller

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 964 of 1039 2021-09-23
Not Subject to NDA
3.25.3.2. AT$GPSR - Reset the GPS Controller
This command resets the GNSS controller.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Other
No
-
2
AT$GPSR=<resetType>
Execution command allows to reset the GNSS controller.
Parameter:
Name
Type
Default
Description
<resetType>
integer
N/A
set the
type of
GNSS
controller
reset.
Values:
0
:
Factory Reset: this option clears all the GNSS
memory including Clock Drift and Extended
Ephemeris files stored into flash memory.
1
:
Coldstart (No Almanac, No Ephemeris): this
option clears all data that is currently stored in
the internal memory of the GNSS receiver,
including Last Position, Almanac, Ephemeris and
Time. All assistance data including XTRA
Ephemeris, almanac, SV health etc will be
deleted. However, the stored Clock Drift and
Extended Ephemeris are retained.
2
:
Warmstart (No ephemeris): this option clears
Ephemeris and Last Position only. Almanac and
Extended Ephemeris are retained.
3
:
Hotstart (with stored Almanac and Ephemeris):
the GNSS receiver restarts by using all data that