Telit Wireless Solutions ME910G1 - AT#PLMNUPDATE - Update PLMN List

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 220 of 1039 2021-09-23
Not Subject to NDA
3.3.15. AT#PLMNUPDATE - Update PLMN List
This set command adds a new entry, or updates an already present one, in the module
PLMN list stored in file system.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#PLMNUPDATE[<action>,<MCC>,<MNC>[,<PLMNname>]]
Parameters:
Name
Type
Default
Description
<action>
integer
0
remove/update PLMN list items
Values:
0
:
remove the entry with selected <MCC> and
<MNC>. Parameter <PLMNname> is ignored
1
:
update the entry with selected <MCC> and
<MNC> if it is already present, otherwise add it
<MCC>
integer
-
Mobile Country Code
<MNC>
integer
-
Mobile Network Code
<PLMNname>
string
-
name of the PLMN; string value,
max length 30 characters.
#PLMNUPDATE command is accepted only if #PLMNMODE is set
to 2.
AT#PLMNUPDATE?
Read command returns the list of entries added or updated with set
command, in the format: