Telit Wireless Solutions ME910G1 - AT#ENS - Enhanced Network Selection

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 267 of 1039 2021-09-23
Not Subject to NDA
3.3.32. AT#ENS - Enhanced Network Selection
Set command is used to activate the Enhanced Network Selection (ENS) functionality.
Cingular Wireless LLC Requirement
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#ENS=[<mode>]
Parameter:
Name
Type
Default
Description
<mode>
integer
0
enable/disable ENS functionality
Values:
0
:
disable
1
:
enable
Additional info:
If AT#ENS=1 has been issued, at every next power-up SIM
Application Toolkit will be enabled on user interface 0 if not
previously enabled on a different user interface (AT#STIA=2).
The new setting will be available at the next power-up.
AT#ENS?
Read command reports whether the ENS functionality is currently enabled
or not, in the format: