Telit Wireless Solutions ME910G1 - AT#FTPCMD - FTP Send Commands

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 733 of 1039 2021-09-23
Not Subject to NDA
3.16.4. AT#FTPCMD - FTP Send Commands
This command sends an FTP command or a combination of two commands to an FTP
server.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Other
No
-
2
AT#FTPCMD=<command1>,<respCode1>[,<command2>,<respCode2>]
Execution command, issued during an FTP connection, sends
<command1> to an FTP server and expects <respCode1> reply. Optionally,
after the execution of the first command, a second command can be sent
(<command2> and <respCode2>).
Parameters:
Name
Type
Default
Description
<command1>
string
-
name of the 1
st
command (maximum
length 200 characters)
<respCode1>
integer
N/A
Expected response code from FTP
server after <command1> execution
Values:
1
:
Expected code 1XY
2
:
Expected code 2XY
3
:
Expected code 3XY
4
:
Expected code 4XY
5
:
Expected code 5XY
<command2>
string
-
name of the 2
nd
command (maximum
length 200 characters)
<respCode2>
integer
N/A
Expected response code from FTP
server after <command2> execution
Values: