Telit Wireless Solutions ME910G1 - AT#NWDNS - DNS from Network

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 716 of 1039 2021-09-23
Not Subject to NDA
3.15.32. AT#NWDNS - DNS from Network
The command allows to get the primary and secondary DNS addresses for selected GSM
or PDP context identifiers
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#NWDNS=[<cid>[,...]]
Execution command returns either the primary and secondary DNS
addresses for the GSM context (if specified) and/or a list of primary and
secondary DNS addresses for the specified PDP context identifiers. The
command returns a row of information for every specified <cid> whose
context has been already defined. No row is returned for a <cid> whose
context has not been defined yet. The response is in the form:
#NWDNS: <cid
n
>,<PDNSaddress
n
>,<SDNSaddress
n
><CR><LF>
#NWDNS: <cid
p
>,<PDNSaddress
p
>,<SDNSaddress
p
><CR><LF>
...
#NWDNS: <cid
q
>,<PDNSaddress
q
>,<SDNSaddress
q
><CR><LF>
Parameter:
Name
Type
Default
Description
<cid>
integer
N/A
Generic context identifier. The value of max is
returned by the test command
Value:
1÷max
:
specifies a particular PDP context definition (see
+CGDCONT command)
Additional info:
Parameters response description: