Telit Wireless Solutions ME910G1 - AT+CSTF - Setting Time Format

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 499 of 1039 2021-09-23
Not Subject to NDA
3.8.11. AT+CSTF - Setting Time Format
Set command sets the time format of the time information presented to the user, which
is specified by use of the <mode> parameter.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
AT+CSTF=[<mode>]
Parameter:
Name
Type
Default
Description
<mode>
integer
1
<mode> affects the time format on the
phone display and doesn't affect the time
format of the AT command serial interface,
so it not actually not used
Values:
1
:
[hh]:[mm] (24 hour clock)
2
:
[hh]:[mm] (a.m./p.m.)
Entering AT+CSTF= returns OK but has no effect.
AT+CSTF?
Read command reports the currently selected <mode> in the format:
+CSTF: <mode>.