Telit Wireless Solutions ME910G1 - AT+CGSMS - Select Service for MO SMS Messages

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 439 of 1039 2021-09-23
Not Subject to NDA
3.6.18. AT+CGSMS - Select Service for MO SMS Messages
Set command is used to specify the service or service preference that the MT will use to
send MO SMS messages.
3GPP TS 27.005
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT+CGSMS=[<service>]
Parameter:
Name
Type
Default
Description
<service>
integer
1
indicates the service or service
preference to be used
Values:
0
:
GPRS
1
:
circuit switched
2
:
GPRS preferred. Use circuit switched if SMS via
GPRS service not available or GPRS not registered.
3
:
circuit switched preferred. Use GPRS if SMS via
circuit switched not available.
Entering AT+CGSMS= returns OK but has no effect.
AT+CGSMS?