Telit Wireless Solutions ME910G1 - AT#EADDR - E-Mail Sender Address

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 775 of 1039 2021-09-23
Not Subject to NDA
3.17.9. AT#EADDR - E-mail Sender Address
This command sets the sender address string to be used for sending the e-mail.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#EADDR=[<eAddr>]
Parameter:
Name
Type
Default
Description
<eAddr>
string
""
sender address. This parameter can be set
to any string with any length up to the one
reported by the test command.
Value:
""
:
default value
AT#EADDR?
Read command reports the current sender address, in the format:
#EADDR: <eAddr>
AT#EADDR=?
Test command returns the maximum allowed length of the string
parameter <eAddr>.