Telit Wireless Solutions ME910G1 - AT#FWAUTOSIM - Automatic Switch of Firmware Image by SIM

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 352 of 1039 2021-09-23
Not Subject to NDA
3.4.21. AT#FWAUTOSIM - Automatic Switch of Firmware Image by SIM
This command allows to set automatically the active firmware image in accordance with
the inserted SIM.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#FWAUTOSIM=<mode>
Parameter:
Name
Type
Default
Description
<mode>
integer
0
disable/enable automatic setting of active
firmware image switch by SIM
Values:
0
:
disable
1
:
enable
When automatic setting of active firmware image switch by SIM
has been enabled (<mode>=1), system reboot is automatic only if
active image must be changed to be in accordance with the
inserted SIM. The #FWAUTOSIM command supports AT&T and
Verizon SIMs.
See also #FWSWITCH command.
AT#FWAUTOSIM?
Read command returns the current setting in the format:
#FWAUTOSIM: <mode>