Telit Wireless Solutions ME910G1 - AT#FTPGETPKT - FTP Get in Command Mode

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 743 of 1039 2021-09-23
Not Subject to NDA
3.16.10. AT#FTPGETPKT - FTP Get in Command Mode
FTP gets in command mode.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#FTPGETPKT=<fileName>[,<viewMode>]
Execution command, issued during an FTP connection, opens a data
connection and starts getting a file from the FTP server while remaining in
command mode.
The data port is opened, we remain in command mode and we see the
result code OK.
Retrieval from FTP server of <fileName> is started, but data are only
buffered in the module.
It is possible to read data afterwards issuing #FTPRECV command.
Parameters:
Name
Type
Default
Description
<fileName>
string
-
file name. Maximum length: 200
characters.
<viewMode>
integer
0
choose the view mode
Values:
0
:
text format
1
:
hexadecimal format
The command causes an ERROR result code to be returned in case
no FTP connection has been opened yet.
Command closure should always be handled by application. To
avoid download stall situations a timeout should be implemented
by the application.