Telit Wireless Solutions ME910G1 - AT#BASE64 - Base64 EncodingDecoding of Socket SentReceived Data

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 701 of 1039 2021-09-23
Not Subject to NDA
3.15.26. AT#BASE64 - Base64 Encoding/Decoding of Socket Sent/Received Data
This command is used to enable or disable base64 encoding and decoding data of a
socket.
RFC 2045 - MIME
RFC 3548
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#BASE64=<connId>,<enc>,<dec>[,<unused_B>[,<unused_C>]]
Set command enables base64 encoding and decoding of data
sent/received to/from the socket in online or in command mode.
Parameters:
Name
Type
Default
Description
<connId>
integer
N/A
socket connection identifier
Value:
1÷max
:
socket connection identifier value (max
value is returned by the Test command)
<enc>
integer
0
selects the encoding standard. The
data received from serial port are
base64 encoded according to the
<enc> parameter and forwarded to
the <connId> socket.
Values:
0
:
no encoding of data received from serial port.
1
:
base64 encoding compliant to RFC 2045 - MIME
standard. As indicated from RFC2045 the encoded
output stream is represented in lines of no more