Telit Wireless Solutions ME910G1 - AT&Y - Default Reset Basic Profile Designation

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 55 of 1039 2021-09-23
Not Subject to NDA
3.2.2.4. AT&Y - Default Reset Basic Profile Designation
Basic profile on startup.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
AT&Y=[<n>]
Set command defines the basic profile that will be loaded on startup. The
wireless module can store 2 complete configurations (see &W).
Parameter:
Name
Type
Default
Description
<n>
integer
0
basic profile that will be loaded on startup.
Value:
0,1
:
profile index
Differently from command Z<n>, which loads just once the desired
profile, the one chosen through command &Y will be loaded on
every startup.
If parameter is omitted the command has the same behavior as
AT&Y0.